Nexa3D post-processing solutions
Automated post-processing solutions for industrial 3D printers with resin
Ensure dimensional accuracy, structural integrity and robust mechanical properties of your 3D printed resin parts by using Nexa3D’s environmentally friendly post-processing solutions. Optimized for use with Nexa3D resin 3D printers and materials, but also compatible with most other resin 3D printers.

Nexa3D xWASH
Powerful, consistent and sustainable washing system
xWASH is suitable for the build volumes and process requirements of the XiP Pro and NXE400Pro 3D printers and was developed for the resin materials validated by Nexa3D. It is also optimized and validated for Nexa3D xCLEAN cleaning solutions, which offer triple saturation limits, environmentally friendly recycling options and enhanced safety features for chemicals and flashpoints.
Nexa3D xCURE
Automatic curing system that ensures dimensional accuracy and structural integrity
xCURE can hold parts with a volume of up to 16 liters. The chamber can hold up to three building boards at the same time and allows parts to be cured directly on the building board or placed in a basket and cured individually. The optimized curing process consists of LEDs with two wavelengths, several build plates and parallel UV and thermal processing. xCURE’s validated end-to-end workflows ensure a perfect balance of temperature, UV wavelength and material-specific sequences to ensure perfect curing. These optimal and effective curing cycles guarantee consistent mechanical properties and predictable performance of your plastic printed parts.


Nexa3D Wash+Cure
2-in-1 desktop post-processing system
Wash+Cure is a 2-in-1 post-processing station optimized for the XiP desktop printer, but also compatible with most other resin-based 3D printers. Simply place the parts in the wash container with IPA or xCLEAN solution and run the wash cycle. Then remove the wash container and place your part on the turntable, fold down the LED arm and place the reflective cover over it for post-curing.
Nexa3D xCLEAN
Environmentally friendly detergent
xCLEAN is an environmentally friendly, safe cleaning solution with a triple saturation of isopropyl alcohol, which requires fewer changes and therefore generates less waste and proves to be an environmentally friendly alternative to IPA. It has been optimized and validated for use with xWASH and Wash+Cure, but can also be used with most other resin aftertreatment systems.
